![](https://www.ai-online.com/wp-content/uploads/2020/04/00default.jpg)
Dassault Systèmes (DS), a world leader in 3D and Product Lifecycle Management (PLM) solutions, has announced that CATIA, the company’s solution for virtual design, was used in the development of over 80 percent* of all the vehicles on display at the 2010 LA Auto Show, open to the public through December 13, 2009. The use of the CATIA solution has proven exceptionally strong (85%) in the Green Ride & Drive vehicles, which are experimental models that offer high efficiency, low environmental impact or run on a variety of alternative fuels. The Green Car Journal’s 2010 Green Car of the Year, as well as the 2010 International Car and Truck of the Year awards announced during the LA Auto Show were also all designed in CATIA.
It has long been recognized that implementation of CATIA allows automakers to reduce vehicle development cost and bring product to market more quickly. In addition to bringing efficiency to the process, CATIA allows more time for innovation and testing of different design features that can help reduce energy consumption, such as rolling resistance, aerodynamics, and vehicle weight, to name a few.
As automakers endeavor to meet today’s aggressive emission standards, vehicle system complexity will continue to increase as hybrid and other advanced powertrain technologies become increasingly prevalent. To help with this, Dassault Systèmes next generation V6 platform provides an integrated, multi-disciplinary approach to product development where all engineering domains and solutions are linked together in a common and dynamic engineering template. Components from multiple disciplines, as well as the numerous interactions between them, are modeled in the authoring environment of CATIA to enable dynamic simulation of the complete system via a virtual prototype. This allows all systems (mechanical, electronic, software) to be dynamically tested and validated together to improve system performance, reduce cost, and maximize reliability of these critical systems.
The L.A. Auto Show runs from December 4 – 13 and takes place at the Los Angeles Convention Center. For more information, visit www.laautoshow.com.
*Numbers based upon LA Auto Show confirmed vehicles as of November 23, 2009
About Dassault Systèmes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 115,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product – SolidWorks for 3D mechanical design – DELMIA for virtual production – SIMULIA for virtual testing – ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systèmes’ shares are listed on Euronext Paris (#13065, DSY.PA) and Dassault Systèmes’ ADRs may be traded on the US Over-The-Counter (OTC) market (DASTY). For more information, visit http://www.3ds.com.
CATIA, DELMIA, ENOVIA, SIMULIA, SolidWorks and 3D VIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.
More Stories
New version of Microwave Switch Design Tool from Pickering Interfaces on show at European Microwave Week 2024
Fusion Processing Announces Readiness for Commercialisation of Automated Trucks and Buses
Rita Case Presented with Lifetime Achievement Award from National Association of Minority Automobile Dealers